2 hours ago
4
Features
- High Heat Stability: Polymaker HT-PLA-GF maintains its shape at temperatures up to 150°C under its own weight, making it ideal for parts exposed to hot garages, vehicle interiors, direct sunlight, or elevated shipping and storage temperatures.
- Glass Fiber Reinforced: Formulated with 12% glass fiber for increased stiffness, strength, and dimensional stability. A dependable choice for tool mounts, garage organizers, mechanical brackets, fixtures, enclosures, and other functional parts.
- Fast, PLA-Like Printing: Prints with the ease of standard PLA, requires no enclosure, and supports speeds up to 350 mm/s. It delivers consistent extrusion, low warping, and reliable dimensional accuracy for both everyday printing and high-throughput production.
- Clean, Textured Finish: The glass fiber formulation creates a professional satin-textured surface that helps reduce the visibility of layer lines, allowing functional parts to look finished with minimal post-processing.
- Annealable for Enhanced Performance: For applications requiring higher heat deflection under load, anneal printed parts at 80–100°C for approximately 30 minutes. Polymaker recommends annealing at 100°C for optimal thermal performance and dimensional stability.
- Built for Shipping and Storage: Its high heat stability helps finished prints retain their shape during long-haul shipping or storage in warmer environments where standard PLA may soften or deform.
- Hardened Nozzle Required: Glass fiber is abrasive and can wear standard brass nozzles. Use a 0.4 mm or larger hardened steel or ruby-tipped nozzle for consistent extrusion and longer nozzle life.
- Supplied on a recyclable cardboard spool for convenient feeding and storage.
Lovely colors with the lowest price:
- Polymaker HT-PLA-GF 1kg Grey [amazon.com] $12.81
- Polymaker HT-PLA-GF 1kg Power Tool Yellow [amazon.com] $12.81
- Polymaker HT-PLA-GF 1kg Power Tool Red [amazon.com] $12.81
- Polymaker HT-PLA-GF 1kg Power Tool Green [amazon.com] $12.81
Features
- High Heat Stability: Polymaker HT-PLA-GF maintains its shape at temperatures up to 150°C under its own weight, making it ideal for parts exposed to hot garages, vehicle interiors, direct sunlight, or elevated shipping and storage temperatures.
- Glass Fiber Reinforced: Formulated with 12% glass fiber for increased stiffness, strength, and dimensional stability. A dependable choice for tool mounts, garage organizers, mechanical brackets, fixtures, enclosures, and other functional parts.
- Fast, PLA-Like Printing: Prints with the ease of standard PLA, requires no enclosure, and supports speeds up to 350 mm/s. It delivers consistent extrusion, low warping, and reliable dimensional accuracy for both everyday printing and high-throughput production.
- Clean, Textured Finish: The glass fiber formulation creates a professional satin-textured surface that helps reduce the visibility of layer lines, allowing functional parts to look finished with minimal post-processing.
- Annealable for Enhanced Performance: For applications requiring higher heat deflection under load, anneal printed parts at 80–100°C for approximately 30 minutes. Polymaker recommends annealing at 100°C for optimal thermal performance and dimensional stability.
- Built for Shipping and Storage: Its high heat stability helps finished prints retain their shape during long-haul shipping or storage in warmer environments where standard PLA may soften or deform.
- Hardened Nozzle Required: Glass fiber is abrasive and can wear standard brass nozzles. Use a 0.4 mm or larger hardened steel or ruby-tipped nozzle for consistent extrusion and longer nozzle life.
- Supplied on a recyclable cardboard spool for convenient feeding and storage.
Lovely colors with the lowest price:
- Polymaker HT-PLA-GF 1kg Grey [amazon.com] $12.81
- Polymaker HT-PLA-GF 1kg Power Tool Yellow [amazon.com] $12.81
- Polymaker HT-PLA-GF 1kg Power Tool Red [amazon.com] $12.81
- Polymaker HT-PLA-GF 1kg Power Tool Green [amazon.com] $12.81
